![]() ![]() ![]() This style of tent is more prone to issues - as there’s more points of connection between beams, meaning more chance of a fault.Features bracer beams, which strengthen the tent structure.Tent inflates from one point, so you can plug a pump in and sit back and relax.This allows multiple people to help, and for the tent o be pitched far quicker. Usually all beams are linked, and can be inflated from any main tube. Type of Inflation Single Inflation Point:Ī single inflation point tent, is a tent which can be inflated from one beam, which is interconnecting to all of the other beams inside the tent. When deflating the tent, simply push the button to open, and the air can flow out of the tent. To close the valve, make sure it is pushed outwards. It is important to close the valve before inflating the tent, or when you remove the pump, all the air will escape out of the open valve. When you remove the pump, the valve will close itself. Then you insert and twist the pump onto the valve, which will open the valve and allow air into the beam. There is white button on the valve - you firstly push this button in, and then this closes the valve. When it comes to deflating the tent, there is a white point on the valve, you twist this to the open setting, and it allows air to escape the valve. Once you remove the pump, the valve seals itself locked. T his is Vango's design - a twist valve, which is locked closed, and then you twist the pump onto the valve, which opens the valve, and allows you to inflate the tent. There are typically two valve systems: Airbeam - Twist Valve Each brand has its own unique pump valve, which should come with the tent. It is incredibly simple and well thought out, and far easier than the hassle of tent poles. There is a simple valve to one side of the tent, which you open and insert the pump into, and then inflate the beam, which then creates the tent’s structure. There is a small hole in the flysheet at each beam, where the valves sits, so the tent can be inflated or deflated from the exterior.The tube and sleeve are then housed in a tent sleeve inside the tent, and once inflated provide the tent's structure.The plastic tube is inserted into a solid polyester sleeve.There is a plastic tube, which can be inflated to a certain pressure.Confused? See below, which helps describe how the design works. Then, the tube and sleeve are inserted into flysheet panels within the tent. Tube and Sleeve Design:Īll tents feature this design, the tubes are pre-tested in the factory to check them for leaks, then they are deflated and inserted into a highly robust tube sleeve, this is to stop the tube over-expanding. A bit like a bicycle tyre, each tube holds an air pressure of anything from 4PSI to 8PSI, and creates a very strong, reliable frame for the tent. Single inflation tents, these can be inflated from one beam, where as multiple inflation points, need each beam inflating separately.īy design though, all work from the same system and rely on a pressurised air system to create a strong, rigid tent structure. Each brand has a selection of them now, which all work slightly differently, but essentially there are now two types - Single Inflation or Multiple inflation. Inflatable tents have become increasingly popular, due to their ease and convenience of pitching. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |